Production possibilities

■ one-meter mass of the section G = 3–12 kg (1,5–25 kg/m subject to
   agreement)
■ mass of one piece G < 150 kg
■ section width B = 20–125 mm
■ section thickness t > 4 mm
■ rod length 3–12 m
■ max. departue of the rod straightness 0,15 %, i.e. 1,5 mm/1 m of the rod
   length
■ usual surface of rods – surface according to the DIN 10 163-3 and max. depth
   of the class C defects
■ the biggest production batch depending on type of section 20–130 t (till wear
   of rolls)
■ length of sides of the circumscribed rectangle a + b < 135 mm
■ final evaluation of suitability of the section for rolling will be made by the
   rollpass designer
■ minimum production batch up 5 t (or according agreement).